Full range of electrical and mechanical services,
including design, installation, maintenance, and repair
for industrial, commercial, and residential projects.
Electrical And
Mechanical Solution
Bently Nevada 330400 / 330425 Accelerometer
The Bently Nevada 330400 / 330425 Accelerometer are intended for critical machinery applications where casing acceleration measurements are required, such as gear mesh monitoring.
Actreg 2 Piece Actuated Full Bore Brass Ball Valves
Actreg Pneumatic Actuators are the perfect solution for installations that require frequent on/off cycles. Designed specifically to work in applications where material handling is required, these devices can be rated up safely and securely with a high safety integrity level (SIL 3).
Pneumatic Hytork/TTV Actuated Butterfly Valves
Suitable for On/Off and modulating applications the TTV/Hytork combination is assembled with Atex compliant components. As part of the Emerson portfolio (Hytork) we can also offer the Asco range of Pilot Solenoid Valves & TopWorx Valve Limit Switch Box, keeping all actuation components under the one brand.
Portable Appliance Tester Megger PAT320
Simple manual or automatic testing
120V 60Hz operation
User-selectable PASS/FAIL limits
Fast test times selectable from 1s
MTL RTK 725B Alarm Annunciator & Event Recorder
It is a versatile and reliable solution for industrial applications, featuring CANBUS® internal communications and isolated RS485 serial communications (supporting 2 or 4 wire configurations) to ensure robust data transmission. With an optional integral PSU accommodating a wide input range of 85-264VAC and 88-300VDC, it offers operational flexibility.
RS PRO Auxiliary Contact - 1NO/1NC, 2 Contact, DIN Rail Mounting
This electro-mechanical product is often used with components such as contactors, circuit breakers and switches. For quick and easy installation, it can be mounted onto a DIN rail that’s approved by the German Institute of Standardisation. When you need to create a more complex switching system, you can also install it by fitting one block on either side of your switching device.
Waygate Technologies Everest Mentor Flex VideoProbe
Multi-point touchscreen allows pinch to-zoom and swipe-and-pan gesture functionality
Menu Directed Inspection (MDI) improves efficiency with auto-tagging and automatic report generation
Gizmo Engineering T4 Bttery Powered Digital Production Cycle Timer
Digital Timer counts up or down from the time you set. When the cycle is completed, a very loud warbling buzzer sounds, and bright LED flashes. Its battery powered so no wires needed. And, installation can be as easy as sticking to a metal surface with the magnet option!
Easy to program with only three buttons.
Reliablilty Concepts Digi-Belt Tension Measurement Tool
The Digi-Beltâ„¢ tension measurement tool is easy to use and gives repeatable belt tension measurements. The easy to follow instructions define the procedure for different belted applications. All you need is the force deflection values for the system you are working on. These values are readily available from your belt and machine manufacturers.
Partlow MRC 5000 Circular Chart Recorder
The Partlow MRC 5000 circular chart recorder was designed with the latest innovations in recording technology, enclosures, and functionality. It is slim, trim, and simple. The MRC 5000 is a digital circle chart recorder capable of measuring, recording, and controlling up to two process variables from a variety of inputs. Two basic versions of the MRC5000 are available for trend recording – one or two pens.
Fluke 1662 Multifunction Installation Tester
The device measures AC/DC voltage up to 500V with True RMS accuracy, a 0.1V resolution, and a 3.3MΩ input impedance, featuring 660V RMS overload protection. It offers auto-ranging continuity tests (20Ω, 200Ω, 2000Ω) with high resolutions and >4V open circuit voltage. Insulation testing is available at 100V, 250V, 500V, and 1000V. It includes an auto-start function for RCD and loop testing, time and date features with optional FlukeView software, and an IP40-rated housing. It complies with IEC/EN, UL, ANSI/ISA, and CAN/CSA standards.
Extech CG204 Coating Thickness Tester
Magnetic induction for ferrous substrates and eddy current measurement for non-ferrous substrates.
Two working modes: Direct and Group
Memory stores 400 readings: 80 Direct and 320 Group
User-programmable high/low alarms
Min/Max/Average, one or two point calibration
Compact Density Meter Micro Motion CDM100
-58 to 400°F (-50 to 204°C) operating temp range
100Ω RTD integral temperature sensor
389 psig (27 bar) max working case pressure
Typical burst pressure is 2824 psig (195 bar)
Honeywell Sensepoint XCD Gas Detector
Plug-in sensors
Color-coded status indicators
Large tri-color backlit LCD
Color-coded status indicators
Large tri-color backlit LCD
E+H Proline Prowirl D 200 Vortex Flow Meter
The E+H Proline Prowirl D 200 Vortex Flow Meter can be installed directly between flanges and thus serves as the functional device for applications in ancillary processes at little installation cost. With genuine loop-powered technology, Prowirl D 200 enables cost-effective and seamless integration into existing infrastructures.
Greyline Instruments DFS 5.1 Doppler Flow Switch
Hi or Lo flow alarm mode
Adjustable time delay
Relay status LED
Flow rate LED bargraph
Watertight, dust tight NEMA4X (IP 67) polycarbonate enclosure with a clear shatter-proof face
Easy Calibration
circuit breaker finder and receptacle tester Extech CB10
The Extech CB10 circuit breaker finder and receptacle tester is a 3-in-1 tester that is a circuit breaker finder, circuit tester, and GFCI receptacle tester.
The Extech CB10 circuit breaker finder will quickly locate 110V to 125VAC circuit breakers and fuses. Bright red and green LEDs indicate if the receptacle is correctly wired or six fault conditions.
ultrasonic Flow meters Panametrics TransPort PT900
A wide selection of transducers for most applications
Velocity, volume, mass, totalizer & energy flow capable
Fast-responding transmitter with 8GB data storage
Requires Android tablet (version 4.4 or newer)
Blancett 1100 Turbine Flow Meter
The Blancett 1100 turbine flow meter is designed to withstand the demands of the most rigorous flow measurement applications. It features a rugged 316 stainless steel housing and rotor support assemblies, CD4MCU stainless steel rotor, and abrasive-resistant tungsten carbide rotor shaft and journal bearings.
Dakota Ultrasonics CMX Series Thickness Gauge
The Dakota Ultrasonics CMX Series thickness gauge measures material and coating thickness simultaneously, while still detecting pits and flaws in a single mode (PECT). The CMX gauge features auto probe zero, auto probe recognition, and auto temperature compensation.
HF Scientific CLX Residual Oxidant and Chlorine Monitor
The HF Scientific CLX residual oxidant and chlorine monitor features user-selectable features and innovative design. The CLX features cycle times adjustable from 110 seconds to 10 minutes, 4-20mA and Modbus outputs that can control feed pumps and user-settable alarms, resulting in low operating and maintenance costs.
Honeywell FSL100 Flame Detectors
Honeywell FSL100 flame detectors monitor hazardous areas for invisible infrared or ultraviolet light that occurs outside the frequency range of visible flames. The FSL100 series detects both hydrocarbon and non-hydrocarbon flaming fires in order to address a wide range of fire protection applications both indoors and outdoors.
Temperature Sensor Rosemount 214C RTD
The Rosemount 214C RTD is a high accuracy, single or dual element resistance temperature detector designed to optimize plant efficiency and increase measurement reliability. The 214C utilizes industry-proven design and specifications along with state of the art manufacturing processes to provide flexible and reliable temperature measurements in process monitoring and control environments.
E+E Omniport 30 Multi Function Monitor
The E+E Omniport 30 Multi Function Monitor is a robust multifunctional hand-held meter that measures 23 parameters fitting a variety of applications. The Omniport 30 offers both continuous and single-point datalogging. The measurement values of up to three channels are stored simultaneously, together with a time and date stamp, in the internal memory of the device.
